Woodworkers and joiners planning a cut list before a shopping trip who want to know exactly how many boards to buy, not a rough guess.
Como funciona
- Name this plan, e.g. "Bookshelf frame".
- Enter your stock board length and saw kerf in millimetres.
- List the pieces you need, one per line as "length x quantity", e.g. "900 x 2".
- Get the number of boards to buy and the exact cutting plan for each one.
O que você ganha
- First-Fit Decreasing bin-packing - a real cutting-stock algorithm, not a rough estimate - decides how many boards to buy and what to cut from each one
- Saw kerf (blade width) is counted between every cut on a board, not just subtracted once at the end - the classic mistake that makes a plan come up short on wood
- Shows the exact cutting plan per board and the leftover offcut length on each one
- Rejects any piece longer than the stock board length outright, before it wastes a shopping trip
Captura de tela
Detalhes técnicos
Como configurar e usar
- Compre a licenca — sua chave (lic_...) aparece na pagina do pedido e no seu e-mail.
- Entre em app.synoriaai.com com sua chave de licenca.
- Sem instalacao — o produto roda no navegador, na sua instancia isolada.
- 1. Open the CutList page and enter a name for your plan, like 'Bookshelf frame'.
- 2. Fill in your stock board length (e.g., 2400 mm) and the saw kerf width (e.g., 3 mm).
- 3. List the pieces you need, one per line with length and quantity, like '900 x 2' for two 900 mm pieces.
- 4. Click the 'Calculate' button to see the number of boards needed, the cutting plan per board, and leftover offcuts.
- 5. Save your plan by name; recalculating updates the same plan instead of creating a duplicate.
Perguntas frequentes
How does the tool handle saw kerf in my cuts?
The saw kerf (blade width) is added between every cut on a board, not just once at the end. This ensures your plan accounts for material lost to each cut, so you don't run short.
What happens if I enter a piece longer than my stock board?
The tool rejects any piece that exceeds the stock board length before calculating, so you know immediately that such a piece won't fit and can adjust your inputs.
Is my plan data safe or stored anywhere?
Plans are saved locally by name in your browser for convenience. No data is sent to servers, and you can delete or overwrite plans as needed.
Produtos relacionados
BiayaBahan: Indonesian Restaurant Ingredient Cost Calculator
Membagi harga beli langsung dengan berat beli selalu meremehkan biaya per porsi, karena bagian yang bisa dipakai (setelah tulang, kulit, atau kupasan dibuang) selalu lebih kecil dari berat beli. Masukkan berat beli,…
BiayaBahan: Indonesian Restaurant Ingredient Cost Calculator
Membagi harga beli langsung dengan berat beli selalu meremehkan biaya per porsi, karena bagian yang bisa dipakai (setelah tulang, kulit, atau kupasan dibuang) selalu lebih kecil dari berat beli. Masukkan berat beli,…
The Clock Does Not Reset
Time in the temperature danger zone is cumulative, and the fridge does not clear it. A tray prepared for 45 minutes at 20°C, refrigerated, displayed for 80 minutes at 15°C, refrigerated again, then served for 30 minutes…
Gauge & Yarn: what your swatch actually says
A pattern's stitch count is not the garment - the gauge is. Cast on a pattern's 100 stitches for a 50 cm back when it assumed 20 sts/10 cm and you knit at 22, and the piece comes out 45.5 cm: 4.5 cm narrower, 9 per cent…